NEEDS TLC - MAKE AN OFFER! 1988 GRP construction with white topsides and superstructure, aft cockpit, bermudan sloop rig, long keel with lifting plate. Wheel steering with a skeg hung rudder. BUILDER The Barbican Yacht Construction Co to designs by Maurice Griffiths. CS-117002G. SSR 25359. DIMENSIONS: LOA 32'8" (9.95m) LWL 26'11" (8.33m) Beam 9'8" (2.99m) Draft keel up 4'0" Draft keel down 6'4" Displacement 5723kg Ballast 2488kg Water capacity Fuel capacity 1 Sail Area approx - Mainsail 208sqft, Genoa 339sqft Built in 1988. The Barbican 33 is a good solid sailing yacht, "Aslan" featur... read more

Commissioned in 1971/2 and launched in 1973. Steel construction (hull, keel, decks, cockpit) with much replacement plating carried out during her restoration 2014-2019. Wheel steering with new steering cables 2023. 8 berths. Bermudan sloop rig. Fin keel. GRP anchor well to prevent corrosion. A complete rebuild from 2014 to 2019 included all new 3mm steel decks, 60% of the hull was replaced in 4mm steel. The hull and decks were faired with marine grade epoxy filler. The interior was sandblasted, coated and foam strayed. The decks and toe rail are Synthetic teak by Sea Dek from Tollesbur... read more

STUNNING CLASSIC LAUNCH! Built in 1963. Wooden construction of mahogany planking on oak frames. BUILDER Camper & Nicholson DIMENSIONS Length Overall 36'0" (10.97m) Beam 9'6" (2.9m) Camper and Nicholson 36ft classic gentleman's motor launch for sale. Built in 1963 by world renowned Camper and Nicholson. Hawk is a wooden boat with a long keel, Mahogany on Oak and powered by a single Ford Mermaid 6.2 Ltr diesel engine from 1989 providing 120 HP via a propeller shaft to a 28 inch bronze propeller. Hawk underwent extensive renovation in 2017. In Summer 2024 she has just had full paint a... read more

Built in around 1980/1. Steel multi chine construction with twin asymmetric hydrofoil ballasted bilge keels, skeg hung rudder, spoon bow, aft cockpit with wheel steering and 4/5 berth interior layout with around 6ft standing headroom. BUILDER Designed by Robert Tucker. Honkley Engineering Ltd, Clywd. DIMENSIONS LOA 10.5m 34'5" (plus boarding ladder) On Deck 9.9m 32ft LWL 9.22m 30’3” Beam 3.4m 11’1” Draught 1.4m 4’7” Displacement 6000kg 6 tons approx Sail Area 43.97m2 473ft2 stated my designer 1980 Steel Robert Tucker Leopard 32, twin keel, wheel steering, BMC 30hp diesel... read more

GO-ANYWHERE OFFSHORE CRUISING YACHT! 1988. GRP hull and deck with cutaway long keel and keel hung rudder, self draining aft cockpit with Edson wheel steering though chain to quadrant. Topsides re-spayed in 2006, treated for Osmosis in 2003 using 7 coats WEST epoxy, Gelshield epoxy in around 2013 by Tollesbury Marina.. BUILDER Bayfield Yachts, Ontario, Canada Designer: Ted Gozzard Hull Number: ZBY32262D888 Registration Number: SSR 106894 VAT Status: PAID EU, in EU waters 31 December 2020 RCD Status: Exempt (in EEA before June 98) Call Sign MDCL7 DIMENSIONS: LOA 36ft (11.00m) approx inc B... read more

2020 BETA DIESEL! OWNER VERY KEEN - MAKE AN OFFER Built in 1970. GRP construction with light blue topsides and off white superstructure. Fin keel, Aft cockpit. Tiller steering. BUILDER Designed by Michel Dufour. DIMENSIONS LOA 30' 4" LWL 22' 0" Beam 9' 11" Draft 5' 6" Displacement 6,600 lbs Ballast 2,400 lbs 1970 Dufour Arpege 30 with very recent BETA 25hp diesel, full cockpit canopy, stack pack mainsail cover and more! MECHANICAL Beta 25, 25hp inboard diesel engine (new in 2020). Engine No 4FC4966). Shaft drive to fixed propeller. Remote throttle controls. ELECTRICAL Alternator ... read more

FULLY RESTORED - WONDERFUL EXAMPLE OF THESE CLASSIC GRP CRUISERS Built in 1971. GRP construction with white topsides and grey decks, fin keel and skeg hung rudder, aft cockpit, tiller steering, bermudan sloop rig, 4 berths. BUILDER Designed by Sparkman & Stephens and built by Aquafibre Ltd, (UK) DIMENSIONS LOA: 30.10 ft / 9.17 m LWL: 23.00 ft / 7.01 m S.A. (reported): 415.00 ft² / 38.55 m² Beam: 9.00 ft / 2.74 m Displacement: 9,000.00 lb / 4,082 kg Ballast: 4,200.00 lb / 1,905 kg Max Draft: 5.00 ft / 1.52 m S & S 30 built in the UK by Aquafibre in 1971. Substantial offshore cruising ... read more

ETAP 32S - SHALLOW TANDEM KEEL - EVS STEERING Built in 2001. GRP construction with white topsides and superstructure, shallow keel, self draining aft cockpit with tiller steering, fractional Bermudan sloop rig, 6 berth internal layout in 3 cabins with a maximum headroom of around 6’3”. Large cockpit and heated wet weather stowage. BUILDER: ETAP Yachting, Belgium. BE-ETP32054J001 DIMENSIONS LOA 32' 4" (9.8m) Beam 11' 2" (3.4m) LWL 27’6” (8.38m) Draft 4' 3" (1.3m) Headroom 6' 3" (1.9m) Displacement 3890 kgs Air draft 14m Etap 32s, 2001, shallow keel with the EVS steering, heating, ... read more

Built in 1994. Steel hard chine with long keel. Hull plating thicknesses - 12mm half round keel bottom, keel sides and bottom plating 10mm, hull sides 6.4mm, above sheer tube and decks 5mm. Epoxy coated below the waterline. Hull portlights 12mm AR polycarbonate. Ballast in keel. BUILDER Designed and built by J Shores / S Fawkes. Plans copyright John Shores. DIMENSIONS Length over all: 21.88m 71'8" (ex bowspit and overhangs) LOA 26.5m 86'11" Length at waterline: 18m 59'1" Beam:4.27m 14'0" Maximum draft: 2.14m 7'1" Bridge clearance:18m  59'1" Hull material: Steel Hull type: Displace... read more

Built in 1973, one of around 450 built in GRP with lifting keel, aft cockpit and tiller steering. BUILDER Christian Maury design, built by Lanaverre in France. DIMENSIONS LOA: 16.90 ft / 5.15 m LWL: 15.58 ft / 4.75 m S.A. (reported): 125.00 ft² / 11.61 m² Beam: 6.10 ft / 1.86 m Displacement: 783.00 lb / 355 kg Ballast: 176.00 lb / 80 kg Max Draft: 3.54 ft / 1.08 m Min Draft: 0.62 ft / 0.19 m Lanaverre 510, 1973, lifting keel trailer sailer built in France, 2 berths, Mariner 3.3hp outboard, mainsail, genoa and spinnaker, Clipper depth and log, road trailer too! MECHANICAL Mariner 3.3 2 ... read more